Skip to content
Savannah Concrete Pros
Our crew pouring a residential concrete driveway

Chatham County · 7 miles from Savannah

Concrete contractors in Pooler, GA

Driveways, patios, slabs, sidewalks and repairs in Pooler. We come out, measure and leave you a free written estimate, then pour on a date we agree with you.

Concrete work in Pooler

Pooler is a city of about 25,711 people in Chatham County, roughly 7 miles from Savannah. Pooler is one of the fastest-growing towns in the county, and most of its housing is recent. Typical jobs are widening a builder's single-width driveway, adding a patio behind a new house and pouring pads for sheds and generators. The low, level ground around Pooler drains slowly, so we pay close attention to fall and base.

Our crews work out of Savannah and cover Pooler as part of the same service area, so you get the same written, itemized estimate and the same crew that would pour a job in town.

What we pour in Pooler

Ground, water and the base under the slab

Pooler is on the same low, level coastal plain as Savannah. Before we price a job we look at where rain goes today: downspouts that empty onto the slab area, corners that hold a puddle, edges that have washed out, and old concrete that has already settled. The fix is in the preparation. We dig out soft spots, bring in graded aggregate and compact it, set a fall that carries water away from the house, and cut control joints on a planned layout.

Permits in Pooler

A driveway apron that meets a public street, a wall above a certain height and any slab that carries a building usually need a permit from the City of Pooler or Chatham County. The rules are set locally and differ from Savannah's. We tell you at the estimate which permits apply, and pulling them is part of the job.

Concrete conditions in Pooler

Averages from the nearest NOAA climate normals station, Savannah Intl AP, GA (3.2 miles away, 46 ft), over 1991–2020.[1] Conditions can change over short distances, so treat these as a planning guide, not a forecast.

Nights at 32°F or below
21
Days at 90°F or above
81
Precipitation a year
48 in
Average temperature
67°F

Heat and drying

Summer brings about 81 days at 90°F or hotter, 62 of them in June–August. High temperatures speed up setting and drying, which raises the risk of plastic shrinkage cracks. For a summer pour we schedule outside the hottest part of the day and protect the slab from drying too fast. NRMCA's hot-weather guidance covers retarders, early starts and curing.[4]

Cold and freeze-thaw

Freezing nights are a regular part of winter in Pooler, about 19 of them in December–February, but rare outside it. A pour between late fall and early spring may need the cold-weather precautions ACI describes for air temperatures expected below 40°F. For driveways, walks and patios that freeze while wet, NRMCA recommends air-entrained concrete to resist scaling. Our estimates say whether the mix is air-entrained.[2, 3]

With 48 inches of precipitation a year, we plan how fresh concrete gets covered if rain arrives during or soon after the pour, and slope the finished slab to shed water away from the house.

  1. NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020 (annual and seasonal, by station) (archive c20230404; imported November 6, 2026), station USW00003822.
  2. American Concrete Institute, ACI 306R-16: Guide to Cold Weather Concreting (preview) (2016 edition; checked October 6, 2026).
  3. National Ready Mixed Concrete Association, CIP 2: Scaling Concrete Surfaces (checked October 30, 2026).
  4. National Ready Mixed Concrete Association, CIP 12: Hot Weather Concreting (checked October 30, 2026).

What to have ready for your Pooler estimate

None of it is required to send the request. It just makes the callback shorter and the estimate more accurate.

  • The property address, so we can check the permit office and get the right crew
  • Rough dimensions: pace it out or measure the longest and widest points
  • What it's for: cars, a work truck, a hot tub, a shed, foot traffic
  • A couple of photos of the area and the route a concrete truck would take
  • Anything you've noticed about water: puddles, a downspout, a low corner
  • When you'd like it done

Free concrete estimate in Pooler

Step 1 of 3

What kind of project is it?
About the project
Your contact details

Free, no obligation. We call to schedule, then come out. We never sell your details.

Questions from Pooler homeowners

Do you really come out to Pooler?

+

Yes. Pooler is about 7 miles from Savannah and inside our regular service area. The estimate visit and the pour are scheduled the same way as for a Savannah address.

Who issues permits in Pooler?

+

Pooler is its own municipality within Chatham County, so permits come from the City of Pooler or Chatham County, not from the City of Savannah. We find out which apply to your job and handle them.

What does a concrete driveway cost in Pooler?

+

We don't publish Pooler prices. As a national reference, ConcreteNetwork puts plain concrete driveways at about $5 to $8 per square foot installed and decorative finishes at $8 to $21. Your written estimate, with tear-out, base and finish itemized, is the real number.

How soon can you pour in Pooler?

+

Estimates usually happen within a few days of your request. We agree the pour date when you accept the estimate and plan it around the weather.

Why homeowners choose us

A written estimate you can compare

Thickness, base depth, reinforcement and finish are spelled out line by line, so you can hold any other quote against it.

One call, then a date

We call back to confirm the details, usually the same business day, and book the visit at a time that suits you. No chasing.

Insured crews, permits pulled

General liability insurance on every job, the certificate with your estimate, and we pull the permits your city or county requires.

Request your free estimate

Other towns we cover

Get my free estimate